Documentation >
MAC-PAC Technical Library >
Manufacturing >
CONBON >
Programs >
CONBON Inquiry - Purpose
CONBON Inquiry - Purpose
CB800E
The CONBON Inquiry program (CB800E) is an online inquiry program that allows the user to perform inquiries on the analysis files, which are generated by the CONBON Analysis program (CB100AP1 - CON, CB100AP2 - BON, or CB100AP3 - single-card). On the Function Select screen, the user may enter either a production center or part number. In addition, a request code field allows the user to indicate whether the inquiry should be performed for CON, BON, or the Single-Card Analysis file.
The detail screen displays the records for the chosen file for a production center (if the production center was entered) or for a part (if the part number was entered). This information is obtained from the most recent run of the CONBON Analysis program.
From the detail screen of the CONBON inquiry program, the user may enter one of the two card print request programs by pressing F9 (Manual Card Print) or F11 (Automatic Card Print). The first card print program, Manual Card Print, allows the user to specify a desired number of cards to print. The Automatic Card Print program prints the suggested number of cards, which is displayed on the detail screen of the CONBON Inquiry program.
