TR130CMD - Term Translation Command

Term translation (TR130CMD)                

Type choices, press Enter.                                           

      Member to translate  . . . . . .    *ALL        member name, *ALL   

      Module code to translate . . . .    *ALL        Module code, *ALL   

      Source library . . . . . . . . .    ITFSYSIN    Name                

      Select non translated terms  . .    *NO         *YES, *NO   

      Translation Library  . . . . . .    ITFSYS      Name

      F3=Exit   F4=Prompt   F5=Refresh   F10=Additional parameters   F12=Cancel     

      F13=How to use this display        F24=More keys   

This screen is used to select the desired member, module, or the whole application for translation entry or modification.  You can also select, if desired, either the nontranslated terms or all terms for the module.

WHAT IS IT USED FOR

This process allows you to select the translated or nontranslated terms from the repository in order to enter or update the translation.

WHAT TO DO BEFORE RUNNING THE BATCH

Ensure that the repository terms generation has already been performed.

WHEN IT HAS TO BE RUN

It has to be run once the repository term generation has run.

WHAT TO DO AFTER RUNNING THE BATCH

Run the source update from the repository with the control report option in order to simulate the source translation and check the translation accuracy.

MEMBER TO TRANSLATE

Specifies the member name to be translated.  By default *ALL is displayed.

MODULE CODE TO TRANSLATE

The MAC-PAC module (OP, DE,...) to be translated must be entered or select all modules with *ALL.

SOURCE LIBRARY

Specifies the source library where the sources are located.

SELECT NON TRANSLATED TERMS

If *YES is entered, the nontranslated terms are displayed.

If *NO is entered, all terms for the member or the module are displayed (nontranslated terms are highlighted).

TRANSLATION LIBRARY

Specifies the translation library where the repository TR100AP is located.