MAC-PAC Homecontact ussupport login 
Documentation > MAC-PAC Reference and Help > Technical Support > Screens > Help Text Maintenance > HP100S02 - Detail

HP100S02 - Detail

 

 

 WILLIAMS                      HELP TEXT MAINTENANCE                    2/24/92

 DSP01          DE100S01 PART MASTER MAINTENANCE - FUNCTION SELECT       DETAIL

                                                                                

               Copy: From Screen              From Tag                         

                     Renumber By:             Scan For Tag:                    

                                                                               

 Select "2" for additional information or "4" to delete.                       

                                                                               

                         Help Text                         H Help Tag Sqnce Sel

                                                                         10    

    This screen is used to select a maintenance function                 20    

 for the Part Master.                                                    30    

                                                                         40    

 PLANT                                                     Y  CZPLNT     50    

 Required.  Used to identify the plant in which               CZPLNT     60    

 maintenance/inquiry will be done.  The plant must            CZPLNT     70    

 be valid, and you must be authorized to the                  CZPLNT     80    

 manufacturing company/warehouse associated with              CZPLNT     90   +

                                                                               

                                                                               

                                                                               

 F3=Exit             F7=Scan             F8=Copy             F10=Select        

 F13=Key Text Only   F18=Renumber        F19=Update          F24=More Keys     

                                                                               

 

This screen allows you to add new help text, delete existing help, change the values of any fields associated with a help text line, or edit the existing help text.  To move directly to a particular area of the text, type the corresponding help tag in the Scan for Tag field and press F7.

Each line of text must be entered or edited separately. The only required field is the Sequence (Sqnce) field. Please note, however, that the Help Tag field must be entered for every line that will be associated with a particular screen field during context-sensitive processing.

The following actions can be performed from this screen.

      Add text.  Type text directly in the Help Text field.  Note that the text will not wrap to the next line.  To avoid the need to tab past additional fields when you reach the end of each line, press F13 to restrict entry to the Help Text field.  When you are done adding the text, press F13 again to return to full- screen entry.

      Insert a single line of text.  Type the new text on the maintenance line at the bottom of the screen, assign a sequence number to indicate where the new line should be inserted, and press Enter.

      Delete a line.  Place a 4 in the Sel field and press Enter.

      Change the text.  Type over the existing text.  To insert text in the middle of a line, press the Insert key.  Note, however, that you can only insert as many characters as there are blank spaces at the end of the line; the help text editor will not move additional characters to the next line.

      Copy text from another screen.  In the Copy fields at the top of the screen, enter the screen number and help tag identifying the text to be copied, then press F8.  The text will be copied after the last line of text.  You can then use the sequence numbers to insert the copied text in the correct place.  Note that if you leave the From Tag field blank, all help text for the screen will be copied.

      Rearrange lines.  Type over the numbers in the Sqnce field to indicate what the new order should be.

      Assign new line numbers.  Enter the interval to be left between each sequence number in the Renumber By field and press F18.  For example, to assign numbers 15, 30, 45, . . ., you would type 15 in the Renumber By field.

      Save the text and return to the function select screen by pressing F19.

      Exit the screen without saving any changes by pressing F3 or F10.

SCREEN NAME                             

Display only.  The screen name associated with this screen number.  The screen number was entered on the select screen; the corresponding name is retrieved from the Screen Description File.  This screen name will appear whenever help is requested for the corresponding screen.

COPY:  FROM SCREEN                      

Optional.  To copy text from another screen, enter the screen number here.  Enter the help tag name associated with the text in the From Tag field.  Then press F8.  The text will be copied after the last help line.  If you leave the From Tag field blank, all text for the indicated screen will be copied.

COPY:  FROM TAG                         

Optional.  To copy text from another screen, enter the help tag associated with the text.  Enter the screen name in the From Screen field.  Then press F8.  The text will be copied after the last help line.  If you leave the From Tag field blank, all help text for the screen will copied.

RENUMBER BY:                            

Optional.  Used to assign new sequence numbers to all lines.  Enter the interval to be used between numbers. For example, to renumber the lines 5, 10, 15, ..., enter a 5 in this field.  Then press F18.  If you press F18 without entering anything in this field, an interval of 10 will be used.

SCAN FOR TAG:          &%