Documentation >
MAC-PAC Reference and Help >
Technical Support >
Screens >
Financial Message File Translation Entry >
TR250S01 - Message Select
TR250S01 - Message Select
WILLIAMS INTERNATIONAL TRANSLATION FACILITY 2/27/92
DSP01 FINANCIAL MESSAGE FILE TRANSLATION ENTRY MESSAGE SELECT
1ST LEVEL ID : AP00100
2ND LEVEL ID :
MESSAGE FILE : FPMSGF
LIBRARY : V70DATMLT
F3=EXIT F6=WORK WITH MSGS
This screen is used to select a message from the financial message file (FPMSGF) for translation. The user enters the message number, second-level text message number (optional), message file name, and name of the library in which the message file was created. If the standard installation programs were used, the FIN-PAC Message File was created in the Common Features Other Object Library (as defined on Reference File category Z02).
1ST LEVEL ID
Required. Must be a valid message number on the corresponding message file. The first-level text for the specified message will be displayed if enter is pressed.
2ND LEVEL ID
Optional. Must be a valid message number on the corresponding message file. It may be different from the message entered for the first-level identification. The second- level text for the specified message will be displayed. Default (blanks) will display the second-level text of the message identified for first-level ID.
MESSAGE FILE
Required. Must be the name of a financial message file that has already been created. A possible value is FPMSGF.
LIBRARY
Required. Must be the name of the library into which the specified message file was created.
COMMAND KEYS
F3 - Exit transaction review mode.
F6 - The WRKMSGD Command is executed. This allows the user to perform any of the WRKMSGD functions on the file specified, including changing a message or messages. Entering a message ID allows the user to position the file at a certain message. If no message ID is entered, the file is positioned at the beginning. Upon completion the Select Screen is redisplayed.