WILLIAMS PLT BEL MASTER SCHEDULING 2/19/93
DSP01 TENTATIVE MASTER SCHEDULE MAINTENANCE SCHEDULE
BICYCLE CHILDREN'S TRICYCLE
Period 2/16/93 - 2/22/93
Action Message - Decrease By 100.000
Schedule - Current 100.000 Planning Policy Code F/T
Schedule - Proposed .000 Planning Policy Qty 1.000
Yield Factor .00 Planning Policy Incr .000
By-Product Supply .000
Ord O Order Quantity Balance
Typ Due Date Start Dt S Number Quantity Rcv/Cov Due
REQ 2/16/93 R ADMREQ 100.000 .000 100.000
F2=Command F3=Exit F10=Function Select
This screen displays the actual manufacturing, transfer, and purchase orders, as well as all receiving transfer and purchase requisitions, due in a selected period/week. The current and tentative schedules are compared, and a suggested action message is provided to assist you in modifying the current schedule to meet the tentative. You may modify the order quantities for open and firm manufacturing orders by entering the new quantity and pressing F9. If no schedule currently exists, F9 is not an available command key.
PLANT
Display only. Used to identify the plant in which maintenance/inquiry will be done.
PART NUMBER/DESCRIPTION
Display only. The part for which the Tentative Master Schedule will be maintained. Must be a valid, active master scheduled part.
PERIOD
Display only. The starting and ending dates for the selected week.
ACTION MESSAGE
Display only. Order action message based on the comparison of the current schedule and proposed tentative master schedule.
CURRENT SCHEDULE
Display only. The current schedule of manufacturing, transfer and purchase orders, as well as any transfer and purchase requisitions created as supply, for the week. This figure includes closed and partially completed orders. If the order has been closed, or if the quantity completed is greater than the order quantity, this figure will include the quantity completed rather than the order quantity. For a requisition, only the uncovered quantity is included in the current schedule.
PLANNING POLICY CODE
Display only. The planning policy code for the part.
Possible values for MRP parts are:
A/R - As Required
F/Q - Fixed Quantity
F/T - Fixed Time
P/C - Physical Control
Possible values for JIT parts are:
F/Q - Fixed Quantity
F/T - Fixed Time
PTL - Partial
AVE - Average
SCHEDULE - PROPOSED
Display only. The proposed tentative schedule from the Detail screen, converted to an ordering requirement by inflating using the yield factor.
PLANNING POLICY QUANTITY
Display only. The planning policy quantity in stockkeeping unit of measure for the part being processed. Used with the Planning Policy Code to define the optimum order size.
UNIT OF MEASURE
Display only. The stockkeeping unit of measure.
YIELD FACTOR
Display only. Used to inflate the item order quantity to account for expected scrap by increasing the required demand quantity of the parent part and planning the order quantity accordingly in the Master Scheduling and Requirements Planning modules.
PLANNING POLICY INCREMENT
Display only. The order policy increment quantity in stockkeeping unit of measure. The quantity that is added to the order quantity once the minimum order quantity is exceeded.
UNIT OF MEASURE
Display only. The stockkeeping unit of measure.
BY-PRODUCT SUPPLY
Display only. If this item (item 1) is a co-product of another item (item 2) and has a usage code of produced, then you can expect to receive a quantity of item 1 from the manufacturer of item 2. This makes item 1 a by-product of item 2. The by-product supply is the quantity of item 1 produced.
ORDER TYPE
Display only. Valid values are:
MFG - Manufacturing Order
PUR - Purchase Order
REQ - Requisition (Purchase or Transfer)
TRO - Transfer Order
FLW - Flow Authorization
ORDER DUE DATE
Display only. The date the order should be completed.
ORDER START DATE
Display only. The date the order should be started.
ORDER STATUS
Display only. The status of the order. Possible values are:
P - Planned Order/Flow Authorization
F - Firm Order/Flow Authorization
O - Open Order
C - Manufacturing Closed
Z - Inventory Accounting Closed
ORDER NUMBER
Display only for MRP, JIT, purchased, transfer, and raw material parts. The unique number assigned to the order or requisition.
PRODUCTION CENTER
Display only for JIT parts. The production center for the JIT manufactured part.
ORDER QUANTITY
Optional. The current order quantity is displayed. You can change this quantity for firm or open manufacturing orders by entering a new quantity and pressing F9.
QUANTITY RECEIVED/COVERED
Display only. The quantity which has been received into inventory against the order or requisition.
BALANCE DUE
Display only. The quantity that remains to be received on the order or requisition.
COMMAND KEYS
Enter - Return to the detail screen.
F2 - Display a window where a fast path option or mnemonic can be entered. Fast path allows the next menu selection to be made directly from this screen. When the window is displayed, pressing F3 will remove it.
F3 - Exit the program without update.
F10 - Return to the function select screen without updating changes.
F19 - Update the manufacturing order with the new quantity you entered. The updating is performed asynchronously.
|