Documentation >
MAC-PAC Reference and Help >
Reference File Categories >
QUANTITY CTL STS CODES
Function Select
RF466S01 - Function Select
WILLIAMS COMMON FEATURES 2/05/92
DSP01 REFERENCE FILE CATEGORY 466 FUNCTION SELECT
Category Name QUANTITY CTL STS CODES
BLANK KEY
Category Key
Request Code 4
1 - Add
2 - Change
3 - Delete
4 - Inquire
F2=Command F3=Exit F7=End Category F8=Display List
F9=Inquiry
The Quantity Control Status Codes category contains all the valid status codes used in Quantity Control processing. The first three codes are system defined. In addition, two status codes may be defined by the user. If user defined codes are used, processing must be added to process them. This category is required if Purchasing is installed.
This category has a blank key to allow only one record.
Detail
RF466S02 - Detail
WILLIAMS COMMON FEATURES 2/05/92
DSP01 REFERENCE FILE CATEGORY 466 INQUIRE
Category Name QUANTITY CTL STS CODES
BLANK KEY
Category Key
QUANTITY CONTROL STATUS CODES:
Data NWC
XXXXX
DECODES: NO CONTROL WAITING CONTROL COMPLETE
Data NOC WAI COM
TTT TTT TTT
USER-DEFINED DECODES:
Data
TTT TTT
F2=Command F3=Exit F9=Inquiry F10=Function Select
This screen is used to define Quantity control status codes.
QUANTITY CONTROL STATUS CODES
Required. Used to define the quantity control status codes that can be used in the system. Each code is one character. The first three codes (N.W.C.) are system defined. the remaining codes may be user defined; if they are used, the system must be modified to process them.
NO CONTROL
Required. Used to define the decode of the No Control Status.
WAITING CONTROL
Required. Used to define the decode of the Waiting Control Status.
COMPLETE
Required. Used to define the decode for the Complete status.
USER DEFINED CODES
Optional. Used to define the decodes for the user defined status codes.