Documentation >
MAC-PAC Reference and Help >
Reference File Categories >
PRT EXP CONFIG CODE
Function Select
RFG88S01 - Function Select
WILLIAMS COMMON FEATURES 1/14/94
DSP01 REFERENCE FILE CATEGORY G88 FUNCTION SELECT
Category Name Prt Exp Config Code
PLANT (3)
Category Key BEL
XXX
Request Code 4
1 - Add
2 - Change
3 - Delete
4 - Inquire
F2=Command F3=Exit F7=End Category F8=Display List
F9=Inquiry
This category is used to specify whether the Expanded Configuration Code will print on the Manufacturing Order (IC580A).
PLANT
Required. Used to identify the plant in which the manufacturing order was cut. The plant must be valid on the Warehouse Description File (IC170M) and you must be authorized to the manufacturing company/warehouse associated with the plant.
Detail
RFG88S02 - Detail
WILLIAMS COMMON FEATURES 1/14/94
DSP01 REFERENCE FILE CATEGORY G88 INQUIRE
Category Name Prt Exp Config Code
PLANT (3)
Category Key BEL
MANUFACTURING ORDER
Data Y
Y
Data
Data
F2=Command F3=Exit F9=Inquiry F10=Function Select
This screen allows you to enter a value specifying whether or not to print the expanded configuration code on a manufacturing order for a given part number and 50-character configuration code.
MANUFACTURING ORDER
Optional. Must be a 'Y' or 'N'. If left blank, defaults to 'N'. This value specifies whether the expanded configuration code will be printed on the manufacturing order. Valid values are:
Y - Print the expanded configuration code on the Manufacturing Order (IC580A)
N - Do not print the expanded configuration code on the Manufacturing Order (IC580A)
The expanded configuration code will be printed for each configured part (parent or component). The expanded configuration code is printed immediately after the configuration code.