Documentation >
MAC-PAC Reference and Help >
Reference File Categories >
PRODUCTION TYPE CODES
Function Select
RFC01S01 - Function Select
WILLIAMS COMMON FEATURES 2/08/92
DSP01 REFERENCE FILE CATEGORY C01 FUNCTION SELECT
Category Name PRODUCTION TYPE CODES
BLANK KEY
Category Key
Request Code 4
1 - Add
2 - Change
3 - Delete
4 - Inquire
F2=Command F3=Exit F7=End Category F8=Display List
F9=Inquiry
The Production Type Codes category contains all of the valid production type codes in the system.
There are two system-defined production type codes:
1 - MRP
2 - JIT The system expects these exact codes; unpredictable results will occur if you attempt to use any other codes without modifying the software accordingly. This category is required if Design Engineering is installed.
This category has a blank key to allow only one record.
Detail
RFC01S02 - Detail
WILLIAMS COMMON FEATURES 2/08/92
DSP01 REFERENCE FILE CATEGORY C01 INQUIRE
Category Name PRODUCTION TYPE CODES
BLANK KEY
Category Key
PRODUCTION TYPE CODES:
Data 12
XX
ENTER DECODES: MRP JIT
Data MRP JIT
TTT TTT
Data
F2=Command F3=Exit F9=Inquiry F10=Function Select
PRODUCTION TYPE CODE
Required. Used to define the two production type codes used in the system. These codes must be 1 and 2.
PRODUCTION TYPE DECODE
Required. Used to define the decode for the MRP production type code.
PRODUCTION TYPE DECODE
Required. Used to define the decode of the JIT production type code.