MAC-PAC Homecontact ussupport login 
Documentation > MAC-PAC Reference Library > Manufacturing > Shop Floor Control > Screens > Shop Floor Report Request > SF310S03 - W/C Performance Detail

SF310S03 - W/C Performance Detail

 

 

WILLIAMS   PLT BEL             SHOP FLOOR CONTROL                      2/20/92

 DSPO1                  W/C PERFORMANCE RETRIEVAL REQUEST                DETAIL

                                                                               

                       Workcenter Number     IAL                               

                                                                               

                       Period Start Date     022092                             

                                                                               

                       Period End Date       022092                            

                                                                               

                       Summary Filter %                                        

                                                                               

                       Request Code          1                                 

                                                                                

                       Requestor             WILLIAMS                          

                                                                               

                                Request Codes                                  

                                                                               

               1. Efficiency     3. Efficiency and Utilization                 

               2. Utilization    4. Summary                                    

                                                                               

                                                                               

 F2=Command          F3=Exit             F4=Prompt           F9=Review         

 F15=Rekey Data      F16=Change Printer  F17=New Plant                         

 

This screen is used to request the Workcenter Performance Report, which provides efficiency and utilization information by employee and machine for each requested workcenter.

PLANT

Required.  Used to identify the plant in which the report request will be made.  The plant must be valid, and you must be authorized to the manufacturing company/warehouse associated with the plant (Reference File category 409).  Defaults to the plant assigned to your user ID, but may be changed by pressing F17.

WORKCENTER NUMBER

Required.  To request the report for a specific workcenter, enter the workcenter number.  To request the report for all workcenters, enter ALL.  The report cannot be requested for miscellaneous cost workcenters (those workcenters with a number of 900 or greater).  If the Summary request code is chosen, this field must be blank.

PERIOD START AND END DATES

Required.  Labor and machine hours that were reported between the Period Start and End Dates will be included on the report.

SUMMARY FILTER PERCENT

Optional. This field should be left blank if options 1, 2, or 3 are chosen.  If you request the summary report, the workcenter detail will be printed for any workcenter for which either efficiency or utilization percentage deviates from the standard percentage for the workcenter by a figure greater than the Summary Filter Percent as entered here.  If you request option 4, Summary Report, enter a value between 0 and 100.

REQUEST CODE

Required.  Must be one of the four request codes that are displayed on the screen.

1 - Efficiency:  Requests a report which prints efficiency details at the operation, machine, employee, shift and workcenter levels for the specified workcenter(s).

2 - Utilization:  Requests a reports which prints utilization details at the machine/employee, shift and workcenter levels for the specified workcenter(s).

3 - Efficiency and Utilization:  Requests both reports for the specified workcenter(s).

4 - Summary:  Requests a report which prints a one-line summary of efficiency and utilization performance for the specified workcenter(s).  If the variance for machine utilization or labor efficiency is greater than the summary filter percent, both the utilization report and the efficiency report will be printed as well as the summary report.

REQUESTOR

Optional.  The requestor will appear at the top of the requested report.

COMMAND KEYS

Enter -  Process report request.

F2    - Display a window where a fast path option or mnemonic can be entered.  Fast path allows the next menu selection to be made directly from this screen.  When the window is displayed, pressing F3 will remove it.

F3    - In Report Request Mode, Exit program without update.

F3    - In Transaction Review Mode, Exit transaction review mode.

F4    - Display a list of values for the field where the cursor is positioned.  If you select one of the items from the list, it will be returned to the application screen.

F5    - Display the previous batch transaction waiting to be submitted (Review mode only).

F6    - Display the next batch transaction waiting to be submitted (Review mode only).

F9    - Toggle between Request and Review mode.

F14   - Delete the currently displayed transaction (Review mode only).

F15   - Used to rekey a screen transaction before the Enter key is pressed.

F16   - Used to change the printer location

F17   - Change the plant in which the user is currently working.

F21   - Display the Reference Number Entry screen (Review mode only).