WILLIAMS PLT BEL REQUIREMENTS PLANNING 6/18/94
DSP01 SIMULATION SCHEDULE MAINTENANCE PROMPT
............................................................................
: PLANNER'S COMMENTS :
: Plant BEL :
: Planner JOHN WILLIAMS :
: :
: :
: Renumber By: 10 :
: :
: Text Sqnce D :
: This simulation schedule should be run today. 10 :
: 20 :
: 30 :
: 40 :
: 50 :
: :
: :
: :
: F5=Top of Text F6=Bottom of Text F13=Key Text Only :
: F18=Renumber F19=Update F24=More Keys :
: :
:..........................................................................:
This screen displays comment text written by the planner. New lines (up to 9,999 comment lines) can be added as well as changed, deleted, and rearranged.
PLANT
Required. Enter an active plant. The planner's comments will be maintained for this plant.
PLANNER
Optional. Enter the initials of the planner in this field.
RENUMBER BY
Optional. The increment to be used when new sequence numbers are assigned. For example, if Renumber By = 5, the new sequence numbers will be 5, 10, 15 ..., when F18-Renumber is pressed. If this field is blank, lines are renumbered by 10. This is a helpful feature if you want to add multiple lines of text.
TEXT
Optional. This area contains comment text. Up to 9,999 lines of text may be written. Each text line can contain up to 57 characters.
SEQUENCE
Optional. The number indicating the order in which comment lines should be displayed and printed. Initially, the system displays sequence numbers in intervals of 10. To rearrange lines, type over the current numbers.
DELETE
Optional. Enter any alphanumeric character in this field to delete the corresponding comment line. Then, press Enter.
TEXT LINE
Optional. If you want to insert a line of text, type the text on this line and enter the sequence number on the Sequence field where you would like the text to appear. Then, press Enter.
SEQUENCE
Optional. This field indicates where text that you entered on the text line will be placed.
COMMAND KEYS
F3 - Exit program without processing the entered data.
F5 - Move to the first line of text.
F6 - Move to the last line of text.
F10 - Clears information that has been entered.
F13 - Allows you to enter text in all fields or only text fields.
F15 - Clears all fields that you have just entered in order to enter new data.
F18 - Renumber the text fields by the quantity specified in the Renumber By field.
F19 - Update the Comments File (CF190M).
F24 - Display additional command keys that are valid for the current screen.
|