MAC-PAC Homecontact ussupport login 
Documentation > MAC-PAC Reference Library > Manufacturing > Manufacturing Engineering > Screens > Department Composition > ME820S03 - Detail

ME820S03 - Detail

 

 

WILLIAMS                 MANUFACTURING ENGINEERING                     2/03/93

 DSP01                     DEPARTMENT COMPOSITION                        DETAIL

                                                                               

                    FRM       FRAMING                                          

                                                                               

            W/C                                  Key  Hrs  Eff  Util           

   S   Plt  No   Workcenter Description          Fac  Day  Pct   Pct           

     * BEL  FR1  FRAME CUTTING                          8   20     5           

     * BEL  FR2  FRAME ASSEMBLY                         8   20    20           

       PLT  FR1  FRAME CUTTING                          8   20    90           

       PLT  FR2  FRAME ASSEMBLY                         8   20    90           

                                                                                

                                                                               

                                                                               

                                                                               

                                                                               

                                                                               

                                                                                

                                                                               

                                                                               

                                                                               

 F2=Command          F3=Exit             F9=W/C Maintenance  F11=KF Maintenance

 F12=KF Inquiry                                                                

 MPW0077 Designated workcenters are inactive                                   

 

 

This screen displays a list of all workcenters that make up a specific department.

DEPARTMENT NUMBER

Display only.  The department number entered on the previous screen.

DEPARTMENT DESCRIPTION

Display only.  The user defined department description.

SELECT

Optional.  Enter an X in this field and press F12 to view further details about the key facility.  Pressing F9 or F11 will allow you access to the maintenance of the workcenter and maintenance of the key facility, respectively.

ACTIVITY CODE

Display only.  An asterisk (*) in this field indicates the workcenter is inactive.

PLANT

Display only.  The plant in which the workcenter which resides in the department is defined.

WORKCENTER NUMBER

Display only.  The workcenter which is contained in the department.

WORKCENTER DESCRIPTION

Display only.  The standard description associated with the workcenter.

KEY FACILITY

Display only.  The key facility associated with the workcenter listed.  The key facility number uniquely identifies a key facility.  Those work areas most likely to present capacity problems should be defined as key facilities so that the load on these work areas can be monitored through key facility loading.  A key facility may be a workcenter, department, or group of workcenters.  A workcenter is defined as being a part of a key facility through Workcenter Maintenance.

HOURS PER DAY

Display only.  Defines the available working hours in a day at this workcenter.  Will be used to schedule start and due dates for Labor Requirements operations in the Shop Floor Control module.

EFFICIENCY PERCENT

Display only.  This figure describes the ratio between the expected (or "earned") hours - based on the standard piece rates and quantities completed - and actual hours completed.  It can be used as a standard against which to report labor and machine performance in the Shop Floor Control module.

UTILIZATION PERCENT

Display only.  This figure describes the percentage of total time spent at the workcenter which is anticipated to be "direct" (i.e. charged to specific orders).  It can be used as a standard against which to report actual performance in the Shop Floor Control module.

COMMAND KEYS

Enter - Return to the Function Select screen.

F2    - Display a window where a fast path option or mnemonic can be entered.  Fast path allows the next menu selection to be made directly from this screen.  When the window is displayed, pressing F3 will remove it.

F3    - Exit program and return to menu.

F9    - Enter the Workcenter Maintenance Program.

F11   - Enter the Key Facility Maintenance Program.

F12   - Enter the Key Facility Inquiry Program.