MAC-PAC Homecontact ussupport login 
Documentation > MAC-PAC Reference Library > Manufacturing > Inventory Control > Screens > Manufacturing Order Status > IC830S03 - Manufacturing Order Status - Order Detail

IC830S03 - Manufacturing Order Status - Order Detail

 

 

 WILLIAMS   PLT BEL             INVENTORY CONTROL                       5/31/95

 DSP01                     MANUFACTURING ORDER STATUS          COMPONENT STATUS

 Order Number           J003240                   Job No                       

 CHAIR                  CONFIGURED CHAIR          UM  EA           Hold Code  N

 SO Line 021050 00 001  WOOD   /OPEN/CURVED  /BLACK/Y/FORES/STRIP              

 Order Status        F  Order Date       4/18/95  Order Quantity          2.000

 Order Type        RWK  Ord Start Date   4/17/95  Quantity Received        .000

 Planner Code           Ord Due Date     4/17/95  Balance due             2.000

 Shop Paperwork Code B  Date Closed      0/00/00  Yield Factor              .00

 Order Policy      A/R  Date Lst Act     4/18/95  Actual Scrap Rate           0

                                                                               

   Component Part/            I C Usg   Required      Quantity      Balance    

 S Desc - Cfg Code       Seq  C S Cde   Quantity       Issued       To Issue   

   CHAIRLEG              000  R O  P         2.000-         .000         2.000-

   V95-CHAIR LEG                     /                                         

   V95-BOLTS             000  R O  C         2.000          .000         2.000 

   BOLTS FOR CHAIR                                                             

   V95-CHAIRBACK         000  R O  P         2.000-         .000         2.000-

   CHAIR BACK FOR CHAIR              /                                        +

                                                                                

                                                                               

 F3=Exit             F8=Order Shortage   F9=Maintenance      F11=Oper Status   

 F12=Stock Status    F13=Time-Phased P/A F14=SO Summary      F24=More Keys     

This screen displays detailed information related to a selected manufacturing order.  Several function keys are provided on this screen to allow easy access to information related to the manufacturing order, the parent part, and the component parts.  Some of the function keys are "fast path" calls into other programs (primarily order and parent part related function keys), while the "F13=Time-Phased P/A" and "F12=Stock Status" keys are direct calls when selecting a component so that control is returned to this program (and this order) when the component information has been reviewed.  Please review the function key glossary at the end of this help text page for complete details.

PLANT

Display only.  The plant in which the inquiry is being done.

MANUFACTURING ORDER NUMBER

Display only.  The system or manually assigned number associated with the manufacturing order.

JOB NUMBER

Display only.  The job number associated with the manufacturing order.

PART NUMBER

Display only.  The number of the part specified on the line.

PART DESCRIPTION

Display only.  This field provides more information for identifying the part.

UNIT OF MEASURE

Display only.  The unit of measure for the line item part.

HOLD CODE

Display only.  The manufactured configured hold code set in manufacturing order maintenance.

ORIGIN SALES ORDER LINE

Display only.  Displays the sales order number, release number, and line number where the manufacturing order originated.  This field only displays for configured manufacturing orders.

CONFIGURATION CODE

Display only.  This code identifies the options selected for a specific configured part.  It uniquely identifies the characteristics of the configured part.

ORDER STATUS

Display only.  The valid order status codes are:

P - Planned

F - Firmed

O - Open

C - Closed

Z - Accounting Closed

ORDER DATE

Display only.  The date on which the order was defined.

ORDER QUANTITY

Display only.  The number of units to be produced.

ORDER TYPE

Display only.  Possible values are:

MFG - Manufacturing

RWK - Rework order

ORDER START DATE

Display only.  The date on which the order is scheduled to start.

QUANTITY RECEIVED

Display only.  The number of completed units received into inventory.

PLANNER CODE

Display only.  Identifies a planner or analyst responsible for the order.

ORDER DUE DATE

Display only.  The date on which the order is due.

BALANCE DUE

Display only.  The number of units ordered but not received into inventory.

SHOP PAPERWORK CODE

Display only.  Defines the paperwork to be printed when the order is opened.

DATE CLOSED

Display only.  The date on which the order was closed.

YIELD FACTOR

Display only.  This is the amount of the order you expect to lose during production of the item.

ORDER POLICY

Display only.  Possible values are:

A/R - As Required

F/T - Fixed Time

F/Q - Fixed Quantity

P/C - Physical Control

DATE LAST ACTIVITY

Display only.  The date that activity of any kind was reported against the order.

ACTUAL SCRAP RATE

Display only.  The scrap that has actually been recorded against the order, calculated when the Shop Floor module is installed by dividing the reported scrap by total order quantity.  If the cumulative scrap is greater than or equal to the order quantity, 9's are moved into the Scrap Rate field.

SELECT

Optional.  Type an 'X' to select a specific component and press F12 to see inventory stock status, F13 to see component time-phased part availability, F14 to see a summary of manufacturing orders for the component, and F23 to see the expanded configuration code for the selected part/configuration code combination.

COMPONENT PART NUMBER/DESCRIPTION

Display only.  Each part that was defined as a component of the order is listed here.

SEQUENCE NUMBER

Optional.  This user-assigned field uniquely identifies an occurrence of a component requirement for the manufacturing order.  If the component is not configuration-coded, the sequence must be 0 and only one occurrence of the component is allowed for the order.  If the component is configuration-coded, the sequence number may be non-zero and identifies the specific occurrence of this component.

ISSUE CODE

Display only.  Defines the material issue method to be used for the part. Valid values are:

R - Requisition issue method.  The issue of material must be reported for this component.

S - Simultaneous issue and receipt method.  The issue of material is recorded automatically when the receipt of the manufactured item is reported.

T - JIT multi-level backflushing method.  The issue and receipt of a component part, or a stock transfer of the component part (depending on the part type) occurs when a flow receipt or a manufacturing order receipt is entered against the parent.  Issue and receipts occur for manufactured part type (2).  Stock transfers occur for transfer part type (8).

If the issue code for a part is 'S' or 'T', either standard SIR processing or multiple location backflushing is used depending on the setting of the Multiple Location Backflushing flag, which is found on Reference File category 436.  If this flag is set to 'N', standard SIR processing is used.  If this flag is set to 'Y', multiple location backflushing is used.

COMPONENT STATUS

Display only.  Valid values are:

O - Open

C - Closed

X - Canceled

USAGE CODE

Display only.  This code is used to determine whether a component part will be consumed (C) by the parent part or produced (P) as a result of making the parent part. Any part type may be a by-product of a manufacturing process.

REQUIRED QUANTITY

Display only.  The expected requirement for the component, inflated by the component scrap factor.

QUANTITY ISSUED

Display only.  The quantity of material actually issued to the order to date.

BALANCE TO ISSUE

Display only.  The quantity remaining to be issued, based on the Required Quantity.

CONFIGURATION CODE

Display only.  This code identifies the options selected for a specific configured part.  It uniquely identifies the characteristics of the configured part.

COMMAND KEYS

Enter - Return to Function Select screen.

F2    - Display a window where a fast path option or mnemonic can be entered.  Fast path allows the next menu selection to be made directly from this screen.  When the window is displayed, pressing F3 will remove it.

F3    - Exit the program and return to menu.  If this screen was accessed from another conversation, pressing F3 will return you to that original conversation.

F8    - Enter the Order Shortage detail screen for the manufacturing order currently being reviewed.

F9    - Enter Manufacturing Order Maintenance, defaulting the order number to the Order Select screen.

F11   - Enter Labor Requirements Inquiry (displayed only if Shop Floor Control installed).

F12   - Enter the Inventory Stock Status detail screen for the selected component using a "direct call" (control is returned to this screen).

F13   - Display the Time-Phased Part Availability Select screen for the selected component using a "direct call" (control is returned to this screen).

F14   - Display the M.O. Status Summary screen for the selected component, or for other order numbers for the parent part of this manufacturing order if no component part is selected.

F18   - Call the standard Comments Master Maintenance Program (CF190E) to add comments to the manufacturing order.  Comments can be viewed for rework orders either with or without components.

F23   - Display the Expanded Configuration Code window which allows you to view the expanded description for a selected component part/configuration code combination or for the parent part/configuration code combination.

F24   - Display additional command keys that are valid for the current screen.