WILLIAMS DESIGN ENGINEERING 2/01/96
DSP01 CONTAINER USAGE INQUIRY FOR JIT PARTS SELECT
Container Code CR
-or-
Ext Container Code
F2=Command F3=Exit F4=Prompt
This screen allows you to request a display of JIT parts that use a specific container.
You can request usage information for either the internal container code or the external container code. Only the parts that use the container code specified will appear on the display screen. For example, if you enter the two-digit container code, parts that use the external container code only will not appear on the display screen.
CONTAINER CODE
Required if the external container code is left blank. To display all JIT parts that use a specific container, enter a container ID that exists on the Container Master file. This field must not be all nines and must be all blanks if the container code field is entered.
EXTERNAL CONTAINER CODE
Required if the container code is left blank. To display all JIT parts that use a specific container, enter an external container code that exists on the Container Master file. This field must not be all nines and must be all blanks if the container code field is entered.
COMMAND KEYS
Enter - Process request.
F2 - Display a window where a fast path option or mnemonic can be entered. Fast path allows the next menu selection to be made directly from this screen. When the window is displayed, pressing F3 will remove it.
F3 - Exit program without processing the entered data.
F4 - Display a list of values for the field where the cursor is positioned. If you select one of the items from the list, it will be returned to the application screen.
|