MAC-PAC Homecontact ussupport login 
Documentation > MAC-PAC Reference Library > Manufacturing > Design Engineering > Screens > BOM Comparison Report Request > DE360S01 - BOM Comparison Report Request

DE360S01 - BOM Comparison Report Request

 

 

 WILLIAMS                      DESIGN ENGINEERING                       2/13/97

 DSP01                BILL OF MATERIAL COMPARISON REQUEST               SELECT 

                                                                               

     Plant 1            BEL               Plant 2            BEL               

     Part Number 1                        Part Number 2                        

     Effectivity Date 1 021397            Effectivity Date 2 021397            

            or                                   or                            

     Revision Level 1                     Revision Level 2                     

                                                                               

         --OR--                                --OR--                          

                                                                               

     MO Number 1                          MO Number 2                          

                                                                               

                        Request Code                                           

                        Explode B/T Parts        N                             

                        Print Immediately        N                              

                        Requestor                                              

                                                                               

                           Request Codes                                       

     1 -  All Components                  2 - Exceptions Only                  

                                                                               

 F2=Command          F3=Exit             F4=Prompt           F9=Review         

 F15=Rekey Data      F16=Change Printer                                        

 

 

This screen is used to request either the BOM Comparison report or the BOM Comparison Exception report.  A user can compare two bill of materials (BOM), the component make-up of two manufacturing orders (MO), or a bill of material to the component make-up of a manufacturing order.  You can generate a report which details all components contained in the compared parts or manufacturing orders.  You can also generate a report containing only exception components.

PLANT 1

Required.  Used to identify the plant from which the bill of material of Part Number One or MO Number One will be used for comparison.

PLANT 2

Required.  Used to identify the plant from which the bill of material of Part Number Two or MO Number Two will be used for comparison.

PART NUMBER 1

Required if MO Number One field is left blank.  The part whose bill of material you want to compare against Part Number Two or MO Number Two.

PART NUMBER 2

Required if MO Number Two field is left blank.  The part whose bill of material you want to compare against Part Number One or MO Number One.

EFFECTIVITY DATE 1

Required if Part Number One field is entered and Revision Level One field is left blank.  The date on which Part Number One's revision level will go into effect on the shop floor.

EFFECTIVITY DATE 2

Required if Part Number Two field is entered and Revision Level Two field is left blank.  The date on which Part Number Two's revision level will go into effect on the shop floor.

REVISION LEVEL 1

Required if Part Number One field is entered and Effectivity Date One field is left blank.  Records the level of engineering change currently in effect for Part Number One.

REVISION LEVEL 2

Required if Part Number Two field is entered and Effectivity Date Two field is left blank.  Records the level of engineering change currently in effect for Part Number Two.

MANUFACTURING ORDER 1

Required if Part Number One field is left blank.  Identifies the manufacturing order to be compared against Part Number Two or MO Number Two.

MANUFACTURING ORDER 2

Required if Part Number Two field is left blank.  Identifies the manufacturing order to e compare against Part Number One or MO Number One.

REQUEST CODE

Required.  Enter the number (1 or 2) corresponding to the type of comparison report you wish to request.  Valid values:

1 - Used for printing all the components in the BOM/component requirements of both parts/MO numbers requested for BOM comparison.

2 - Used for printing only those components with exceptions.  Exceptions include differences in component quantity pers and components not common to both parts/MO numbers requested for BOM comparison.

EXPLODE BUILD-THRU PARTS

Required.  Specifies whether or not build-thru parts will be printed on the BOM Comparison report along with all component parts or exception component parts.  Valid values:

Y - Display all build-thru parts on this report.

N - Do not display any build-thru parts on this report.

PRINT IMMEDIATELY

Required.  Field value must be either 'Y' or 'N'.  If 'N' is specified, the report will print when released from the System Processing Menu.  If 'Y' is specified, the report will be submitted immediately, therefore eliminating the need to release it.  Field defaults to 'N'.

REQUESTOR

Optional.  Identifies the person requesting the BOM Comparison report.

COMMAND KEYS

Enter - Submits the BOM Comparison report.

F2   - Display a window where a fast path option or mnemonic can be entered.  Fast path allows the next menu selection to be made directly from this screen.  When the window is displayed, pressing F3 will remove it.

F3   - Exit program and return to menu.

F4   - Display a list of valid values for the field where the cursor is positioned.  If you select one of the items from the list, it will be returned to the application screen.

F5    - Displayed only in Transaction Review mode.  This key is used to view the previous transaction.

F6    - Displayed only in Transaction Review mode.  This key is used to view the next transaction.

F9   - Enter the Transaction Review program to review and delete report requests.  Once in Transaction Review mode, this key allows you to return to Entry mode to reenter applicable data.

F14 - Displayed only in Transaction Review mode.  This key is used to delete the current transaction on the screen.

F15  - Redisplay screen before most recent changes.

F16  - Change the output location.

F21   - Displayed only in Transaction Review mode.  This key is used to used to enter a new reference ID.