WILLIAMS PLT BEL CAPACITY PLANNING 2/02/92
DSP01 LOAD SUMMARY INQUIRY MACHINE
LAST CP GENERATION DATE 0/00/00
FROM 2/03/92 TO 2/03/93
Workcenter Number IAM MACHINE PACED WORKCENTER Machine/Labor Paced M
Department Number D10 Hours Per Day 08 Include Setup In Load Y
------------ Percentage Load ------------
Period Total Effect 0 100 200
End Load Capacity +---------+---------+---------+---------+
1/31/92 5
2/07/92 0 0 NO CAPACITY DEFINED
2/14/92 0 0 NO CAPACITY DEFINED
2/21/92 0 0 NO CAPACITY DEFINED
2/28/92 0 0 NO CAPACITY DEFINED
3/06/92 0 0 NO CAPACITY DEFINED
3/13/92 0 0 NO CAPACITY DEFINED
3/20/92 0 0 NO CAPACITY DEFINED
3/27/92 0 0 NO CAPACITY DEFINED +
F2=Command F3=Exit F8=W/C Inquiry F11=Labor Summary
F12=Load Detail
This screen is used to review at the summary level the machine load scheduled onto a workcenter. The machine hours are compared with available capacity and presented graphically.
PLANT
Display only. The plant where the workcenter is located.
LAST CP GENERATION DATE
Display only. The date on which the generation of planned labor requirements was last performed. The load information displayed will not reflect changes to the order schedule which have been made since this date. You may wish to re-run the CP Generation to obtain the most up-to-date load picture. If Shop Floor Control is installed, load due to open and firmed orders will be completely current. That due to planned orders will be current only as of the last generation date.
FROM (START DATE)
Display only. The load is calculated beginning with this date. It was specified on the function select screen.
TO (END DATE)
Display only. The load is calculated through this date. It was specified on the function select screen.
WORKCENTER NUMBER
Display only. The workcenter for which load information is displayed. It was specified on the function select screen.
MACHINE/LABOR PACED FLAG
Display only. Indicates whether the workcenter is machine-paced (M) or labor-paced (L).
DEPARTMENT NUMBER
Display only. The department that is responsible for the workcenter.
HOURS PER DAY
Display only. The standard number of hours available at the workcenter each day.
INCLUDE SETUP IN LOAD
Display only. Indicates whether the load calculations include load caused by setup activities. Values are Y (yes) and N (no).
PERIOD END DATE
Display only. The cutoff date for each period. The length of the time periods displayed is defined by the number of days per period in the period mask. The first period represents all load before the start date entered on the select screen.
TOTAL LOAD
Display only. The outstanding machine hours scheduled to be performed at the workcenter in each period. This may or may not include setup time, depending on the workcenter option.
EFFECTIVE CAPACITY
Display only. The capacity for each period, calculated from the machine hours per day which was defined in the Effective Capacity maintenance conversation.
PERCENTAGE LOAD
Display only. The graph shows total load as a percentage of total capacity for each period. The letters in the graph represent open, firmed and planned order contribution to the outstanding workload. The detailed operations which make up the summary totals may be reviewed by selecting the required period with an 'X' and pressing Command 12.
SELECT
Optional. To view a detailed breakdown of load for one period, type an X in this field and press F12.
COMMAND KEYS
Enter - Return to workcenter/period selection.
F2 - Display a window where a fast path option or mnemonic can be entered. Fast path allows the next menu selection to be made directly from this screen. When the window is displayed, pressing F3 will remove it.
F3 - Exit program.
F8 - Enter the Workcenter Inquiry program.
F11 - Review labor load summary for same workcenter and time range.
F12 - Review detailed operations comprising load for the selected summary period.
|