WILLIAMS PLT BEL CONBON 1/25/93
DSP01 CON CARD PRINT REQUEST FREE FORM
Production Center APC-1
Mnt Rev Begin End Cont Print One
Cde Part Number Lvl Date Date Qty Cards Time
1 TABLE-LEG 012693 1 1
F2=Command F3=Exit F5=Previous Trans F6=Next Trans
F9=Enter Mode F14=Delete Trans F21=New Ref ID
This screen is used to review the Manual Card Print CON Free Form request screen.
PLANT
Display only. Used to identify the plant in which maintenance/inquiry will be done. The plant must be valid, and you must be authorized to the manufacturing company/warehouse associated with the plant (Reference File category 409). Defaults to the plant assigned to your user id.
PRODUCTION CENTER
Display only. The production center entered on the select screen.
MAINTENANCE CODE
Display only. This field is displayed only if the net change option was selected. Specify whether to add or remove the print quantity to increase or decrease the current number of cards on the shop floor. Valid values are:
1 - Add and print the card quantity requested
2 - Remove the card quantity requested
3 - Replace existing cards
PART NUMBER
Display only. Must be a valid part number. The part number is a unique identification associated with manufactured, assembled, purchased, or reference items.
REVISION LEVEL
Display only. Enter an existing level of engineering change that is to be in effect for the part number on the card.
BEGIN DATE
Display only. Enter the first date on which the card should be used.
END DATE
Display only. Enter the last date on which the card should be used.
CONTAINER QUANTITY
Display only. Enter the number of parts to go into an individual container on the shop floor.
PRINT CARDS
Display only. Enter the number of cards to add, remove, or replace on the shop floor. Must be a positive integer.
ONE TIME
Display only. If the CON card is to account for a spike in demand then the quantity is a one-time quantity. Enter X if the CON card is a one-time card. One-time cards do not update the part's CON card count.
COMMAND KEYS
F2 - Display a window where a fast path option or mnemonic can be entered. Fast path allows the next menu selection to be made directly from this screen. When the window is displayed, pressing F3 will remove it.
F3 - Exit to menu.
F5 - Display previous transaction.
F6 - Display next transaction.
F9 - Return to the screen from which you requested the transaction review.
F14 - Delete this transaction.
F21 - New Reference ID.
|