WILLIAMS PLT BEL CONBON 1/25/93
DSP01 BON CARD PRINT REQUEST FREE FORM
Production Center APC-1
Mnt Rev Begin End Cont Print Parent Part
Cde Part Number Lvl Date Date Qty Cards Number
1 TABLE-LEG 004 012593 012593 100.000 1
F2=Command F3=Exit F5=Previous Trans F6=Next Trans
F9=Enter Mode F14=Delete Trans F21=New Ref ID
This screen is used to review the Manual Card Print BON/ Single Free Form request screen.
PLANT
Display only. Used to identify the plant in which maintenance/inquiry will be done. The plant must be valid, and you must be authorized to the manufacturing company/warehouse associated with the plant (Reference File category 409). Defaults to the plant assigned to your user id.
PRODUCTION CENTER
Display only. Displays the production center entered on the select screen.
MAINTENANCE CODE
Display only. Either add or remove the print quantity to increase or decrease the current number of cards on the shop floor. Valid values are:
1 - Print and add the card quantity requested
2 - Remove the card quantity requested
3 - Replace existing cards
PART NUMBER
Display only. Must be a valid part number. The part number is a unique identification associated with manufactured, assembled, purchased or reference items.
REVISION LEVEL
Display only. Input an existing level of engineering change that is to be in effect for the part number on the card.
BEGIN DATE
Display only. Begin date for the card to be printed. Must be blank if removing cards from the shop floor. All removes will be performed last for each part.
END DATE
Display only. End date for the card to be printed. Must be blank if removing cards from the shop floor.
CONTAINER QUANTITY
Display only. Number of parts to go into an individual container on the shop floor.
PRINT CARDS
Display only. The number of cards to add, remove, or replace on the shop floor. Must be a positive integer.
PARENT PART NUMBER
Display only. The number of the parent part associated with the component. If entered must be a valid part number on the Part Master. The parent to component relationship must be a valid relationship on the Product Structure File. The parent part number is used to retrieve and format the using location for the component part number on the card.
COMMAND KEYS
F2 - Display a window where a fast path option or mnemonic can be entered. Fast path allows the next menu selection to be made directly from this screen. When the window is displayed, pressing F3 will remove it.
F3 - Exit to menu.
F5 - Display previous transaction.
F6 - Display next transaction.
F9 - Return to the screen from which you requested the transaction review.
F14 - Delete this transaction.
F21 - New Reference ID.
|