WILLIAMS PLT BEL CONBON 1/25/93
DSP01 CON CARD PRINT REQUEST NET CHANGE
Production Center APC-1
Rev Begin End Cont Sug Cur Print One
Part Number Lvl Date Date Qty Cards Cards Cards Time
1 TABLE-LEG 000 012593 012993 55.000 1 0 1
F2=Command F3=Exit F5=Previous Trans F6=Next Trans
F9=Enter Mode F14=Delete Trans F21=New Ref ID
This screen is used to review the Manual Card Print Total/Net Change request screen.
PLANT
Display only. Used to identify the plant in which maintenance/inquiry will be done. The plant must be valid, and you must be authorized to the manufacturing company/warehouse associated with the plant (Reference File category 409). Defaults to the plant assigned to your user ID.
PRODUCTION CENTER
Display only. The production center entered on the select screen.
MAINTENANCE CODE
Display only. The action suggested by the CONBON Analysis Program. This code is displayed only if the net change option was selected. Defaults to either add or remove upon initial display, depending on whether the print quantity is an increase or decrease from the current number of cards on the shop floor. Possible values are:
1 - Print and add the card quantity requested
2 - Remove the card quantity requested
PART NUMBER
Display only. All parts from the Part Master File that are produced in the requested production center and that have records on the requested analysis file for the current or following flow interval.
REVISION LEVEL
Display only. Level of engineering change that is in effect for the part.
BEGIN DATE
Display only. The first date on which this card should be used.
END DATE
Display only. The last date on which this card should be used.
CONTAINER QUANTITY
Display only. The number of parts to go into an individual container on the shop floor.
SUGGESTED NUMBER OF CARDS
Display only. If net change data was selected, the number of cards to be added to or removed from the floor (total suggested quantity less current quantity). If total suggested data was selected, the total number of cards to be used on the floor (equal to the card print quantity).
CURRENT NUMBER OF CARDS
Display only. The current number of cards on the shop floor for the part number at the specified revision level between the begin and end dates.
CARD PRINT QUANTITY
Display only. Enter the number of cards to print for the production center/part number combination for the requested card type.
ONE TIME
Display only. An X is displayed if the CON analysis record is for a one-time card. One-time cards do not update the part's CON card count.
COMMAND KEYS
F2 - Display a window where a fast path option mnemonic can be entered. Fast path allows the next menu selection to be made directly from this screen. When the window is displayed, pressing F3 will remove it.
F3 - Exit to menu.
F5 - Display previous transaction.
F6 - Display next transaction.
F9 - Return to the screen from which you requested the transaction review.
F14 - Delete this transaction.
F21 - New Reference ID.
|