MAC-PAC Homecontact ussupport login 
Documentation > MAC-PAC Reference Library > Manufacturing > CONBON > Screens > CONBON Manual Card Print Request > CB340S02 - Analysis Data Loaded Detail

CB340S02 - Analysis Data Loaded Detail

 

 

 

 

WILLIAMS   PLT BEL                     CONBON                          2/03/92

 DSP01                         CON CARD PRINT REQUEST           TOTAL SUGGESTED

                                                                                

       Production Center  CNTR01            CENTER 01                          

                                                                               

                                                                               

                      Rev  Begin     End       Cont     Sug   Cur  Print  One  

        Part Number   Lvl  Date      Date      Qty     Cards Cards Cards  Time 

      TABLE-LEG       000  2/03/92  2/07/92     10.000     1     1     1       

      TABLE-LEG       000  2/03/92  2/03/92     10.000     1     0     1  X    

                                                                               

                                                                               

                                                                               

                                                                               

                                                                               

                                                                                

                                                                               

                                                                               

                                                                               

                                                                               

                                                                               

 F2=Command          F3=Exit             F9=Review           F10=Select        

 F11=Immediate Print                                                           

 

This screen allows the user to view and/or modify analysis records from the CON, BON, and single card analysis files in order to make print requests.  Either net change or total suggested quantity data are displayed, as specified on the select screen.

PLANT

Required.  Used to identify the plant in which maintenance/inquiry will be done.  The plant must be valid, and you must be authorized to the manufacturing company/warehouse associated with the plant (Reference File category 409).  Defaults to the plant assigned to your user id.

PRODUCTION CENTER

The production center entered on the select screen.

MAINTENANCE CODE

The action suggested by the CONBON Analysis Program. This code is displayed only if the net change option was selected.  Defaults to either add or remove upon initial display, depending on whether the print quantity is an increase or decrease from the current number of cards on the shop floor.  Possible values are:

1 - Print and add the card quantity requested

2 - Remove the card quantity requested

PART NUMBER

All parts from the Part Master File that are produced in the requested production center and that have records on the requested analysis file for the current or following flow interval.

REVISION LEVEL

Level of engineering change that is in effect for the part.

BEGIN DATE

The first date on which this card should be used.

END DATE

The last date on which this card should be used.

CONTAINER QUANTITY

The number of parts to go into an individual container on the shop floor.

SUGGESTED NUMBER OF CARDS

If net change data was selected, the number of cards to be added to or removed from the floor (total suggested quantity less current quantity).  If total suggested data was selected, the total number of cards to be used on the floor (equal to the card print quantity).

CURRENT NUMBER OF CARDS

The current number of cards on the shop floor for the part number at the specified revision level between the begin and end dates.

CARD PRINT QUANTITY

Required.  Enter the number of cards to print for the production center/part number combination for the requested card type.

ONE TIME

An X is displayed if the CON analysis record is for a one-time card.  One-time cards do not update the part's CON card count.

COMMAND KEYS

Enter - Process request.

F2    - Display a window where a fast path option or mnemonic can be entered.  Fast path allows the next menu selection to be made directly from this screen.  When the window is displayed, pressing F3 will remove it.

F3    - Exit and return to main menu.

F4    - Display a list of values for the field where the cursor is positioned.  If you select one of the items from the list, it will be returned to the application screen.

F9    - Call the Transaction Review Program (CB300E).

F10   - Return to the select screen without submitting requests.

F11   - Calls the Card Print Program directly to process all cards within the requested production center.  This command key suspends processing until all analysis records are processed.