MAC-PAC Homecontact ussupport login 
Documentation > MAC-PAC Reference Library > Distribution > Synchro > Screens > Label > GA160S06 - Handling Unit Relationships

GA160S06 - Handling Unit Relationships

 

 

 WILLIAMS        CO  001            SYNCHRO                             7/08/96

 DSP01           WHS BEL      LABEL MAINTENANCE                HU RELATIONSHIPS

                                                                               

 Handling Unit No 000002255                                                    

 Item No          A-SCREW                 TEST                                 

 No PU per HU       1                     Standard Qty-OU            1.000     

 No PU Entered      0                     Quantity-OU                 .000     

 Net-Weight              .000             Gross-Weight                .000     

 Label Rev Level                          Def Point of use  VDA123456VDA12345  

                                                                               

 Pallet           999999999999999         Pallet Cust                          

 Slide-In/Qty                             Slide-In Cus                         

 Cover/Qty                                Cov Customer                         

                                                                               

                                            PU Number                          

                                                                               

                                                                                

                                                                               

                                                                               

                                                                               

                                                                              +

 F2=Command          F3=Exit             F4=Prompt           F10=Select        

 F13=Cancel Trans    F22=End Trans       F7=Label header                       

                                                                                

 

The Label Maintenance - Handling Unit Relationships screen allows you to add the handling labels corresponding to a shipment when using VDA messaging.  You must enter the shipping proposal corresponding to the shipment and the packaging label numbers that make up the shipment.

A number is automatically assigned to the main handling unit label you are creating.

The packaging labels you enter cannot be associated with a handling label already, and all packaging units must correspond to the same item.  If you want to create a handling unit label that covers a shipment of multiple items, you must choose the Mixed Handling Unit Label (label type 4) from the Function Select screen.  Labels prepared for a previous shipping proposal and not yet used for a pallet can be used again as long as they correspond to identical shipping conditions (same endorsement).

COMPANY/WAREHOUSE

Display only.  Displays the company/warehouse from which the items corresponding to the labels you are maintaining are associated.

HANDLING UNIT NUMBER

Display only.  Indicates the pallet label number.  This number will be used during the preparation of the shipping list associated with the pallet.

ITEM NUMBER

Display only.  Displays the MAC-PAC item number for which you are maintaining labels.

ITEM DESCRIPTION

Display only.  Displays the description of the item for which you are maintaining labels.

NUMBER OF PACKAGING UNITS PER HANDLING UNIT

Display only.  Displays the standard number of packaging units contained in a handling unit.  This quantity is defined in the endorsement as the conversion factor HU/PU.

STANDARD QUANTITY-ORDERING UNIT

Display only.  Displays the standard number of ordering units contained in each handling unit.  It is calculated based on the endorsement information and the following conversion factors:

HU/PU  - Number of packaging units per handling unit

PU/SKU - Number of stock units per packaging unit

OU/SKU - Number of stock units per ordering unit

The displayed quantity is equal to the first conversion factor times the quotient of the other two factors.

NUMBER OF PACKAGING UNITS ENTERED

Display only.  This number is progressively increased as packaging unit label numbers are entered.

QUANTITY-ORDERING UNIT

Display only.  This quantity is recalculated based on the item quantities (expressed in ordering units) associated to each PU label entered.  This is processed after entry.

NET WEIGHT

Display only.  The value indicated in this field comes from the weight entered on the Part Master file multiplied by the number of items per packaging label.

GROSS WEIGHT

Display only.  The gross weight is recalculated based on the item quantities (expressed in ordering unit) associated to each packaging label entered. Data in the Container Master file feeds into the calculation of this weight.

LABEL REVISION LEVEL

Display only.  This is the customer's item revision level entered on the Function Select screen.

DEFAULT POINT OF USE

Display only.  This location is retrieved from the picker header or previous delivery request (if existing) and specifies where the items entered on the label will be consumed on the customer's site.

PALLET

Required for label type 3.  Required if Pallet Customer is entered.  (Displayed only for label types 2, 3, and 4.)  The pallet code for which you are maintaining the label.  Used to identify the type of container used for the shipping of the goods.  If entered, must exist on the Container Master file.

PALLET CUSTOMER

Required for label type 3.  Required if Pallet is entered.  (Displayed only for label types 2, 3, and 4.)  Identifies the user-defined ship-to customer name which will be printed on the label you are maintaining.  If entered, must exist on the Container Master file.

SLIDE-IN UNIT

Required if the Slide-In Quantity or Slide-In Customer is entered.  (Displayed only for label types 2, 3, and 4.)  Used to describe the packaging material used as the layer between different levels of goods stored on a handling unit.  If entered, this data is transmitted within the VDA 4913 message and validated against the Container Master file. 

SLIDE-IN QUANTITY

Required if the Slide-In Unit or Slide-In Customer is entered.  (Displayed only for label types 2, 3, and 4.)  The amount of slide-in units used within the label you are maintaining.

SLIDE-IN CUSTOMER

Required if the Slide-In Unit is entered.  (Displayed only for label types 2, 3, and 4.)  Identifies the user-defined ship-to customer name which will be printed on the label you are maintaining.

COVER UNIT

Required if the Cover Quantity or Cover Customer is entered.  (Displayed only for label types 2, 3, and 4.)  Used to describe the packaging material used as the layer between different levels of goods stored on a handling unit.  If entered, this data is transmitted within the VDA 4913 message and validated against the Container Master file. 

COVER QUANTITY

Required if the Cover Unit or Cover Customer is entered.  (Displayed only for label types 2, 3, and 4.)  The amount of cover units used within the label you are maintaining.

COVER CUSTOMER

Required if the Cover Unit is entered.  (Displayed only for label type 2, 3, and 4.)  Identifies the user-defined ship-to customer name which will be printed on the label you are maintaining.

PACKAGING UNIT LABEL NUMBER

Optional.  Indicates the packaging unit label number.  Cannot have been already used in a pallet and must correspond to the same blanket order, item and endorsement.

COMMAND KEYS

Enter - Validates the entered data and updates the different values.

F2     - Display a window where a fast path option or mnemonic can be entered.  Fast path allows the next menu selection to be made directly from this screen.  When the window is displayed, pressing F3 will remove it. 

F3     - Allows the user to exit the screen without updating the entered data.

F4    - Display a list of values for the field where the cursor is positioned.  If you select one of the items from the list, it will be returned to the application screen.

F7     - Allows the user access to the Common Label Information window.  Pressing F3 from the window will bring the focus back to this screen.

F10   - Returns focus back to the Function Select screen.

F13   - Cancels transaction and returns focus back to the Function Select screen.

F22   - Validates the entered data and starts the printing process of the labels.